Information
Pro Comfort Sanity Electric Breast Pump has been designed for all mothers. It is a comfortable, supportive, and very convenient device for extracting and storing breast milk. It imitates the child’s natural sucking reflex.
It is designed for all mothers needing comfort and professional support when feeding healthy and sick children.
There are no contraindications to the use of Pro Comfort Sanity Electric Breast Pump.
The product meets the requirements of PN-EN 14350-1.
Features:
- Intuitive control panel
- Simple to use
- Comfortable, thanks to a massage cushion
- Stimulation mode indicator
- Extraction mode indicator
- Increase / decrease the suction level
- Mode button
- Suction level indicator
Indications
Pro Comfort Electric Breast Pump is intended for use by mothers breastfeeding in the hospital and at home. Its primary function is milk extraction. It is recommended for relieving the symptoms of swelling when extracting milk. It helps to treat inflammation of the breast by removing milk from the affected breast. Its additional task is to relieve irritated or cracked nipples. Through stimulation and massage, the pump pull out flat or inverted nipples, preparing them for milk extraction or feeding.
User manual
Before the first and each subsequent use, wash the pump. Use drinking water for washing and rinsing. For disinfecting, use boiling water. After connecting all the elements, check whether the product has been properly connected to a power source. Before touching the breast and personal elements of the breast pump, wash your hands thoroughly with soap and water.
Place the funnel on the breast so that the nipple is centred.
Multifunction button (on/off)
Press the button. The first mode is stimulation. It stimulates the nipple and stimulates milk flow.
You can adjust the frequency and power using the +/- buttons
To turn off the pump, press the button (on/off) and hold it for 3 seconds.
Changing the mode.
Turn on the breast pump (on/off).
The first mode is stimulation. To switch to extraction mode, press the multifunction button (on/off). In this mode, the pump extracts the milk and stimulates its production.
You can adjust the frequency and suction power using the (+/-) button
(+/-) buttons
Increase/decrease the frequency and strength of suction. You can increase the frequency and power of the device using the control button. This means larger amount of milk extracted in less time. After use, dismantle the pump and wash all parts that come into contact with the breast and milk, in order to avoid drying of milk and prevent the growth of bacteria. The pump shuts off automatically after 30 minutes.
Safety tips
Before use, read the user manual carefully.
The power supply must have the correct voltage (100V-240V, DC 6V, 1.0A).
Use only the power supply supplied with Pro Comfort Electric Breast Pump.
For safety reasons, a damaged power cable must be replaced by the manufacturer, in an authorised service centre or by a qualified person.
Do not immerse the electrical unit in water or wash with a wet sponge or cloth.
Do not wet the product.
Do not use while sleeping or when you feel sleepy.
Keep all components out of the reach of children. Prevent children from playing with the device.
Always disconnect the device from the mains when not in use.
The device is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities unless they are under supervision or have been instructed in the use of the device in a safe manner.
Breast pump is a medical device for personal use and should not be used by more than one person.
