• LaktatorProComfort
  • Breast-pump-electric-sanity

Electric BreastPump ProComfort

INFORMATION

Pro Comfort Electric Breast Pump is intended for use by mothers breastfeeding in the hospital and at home. Its primary function is milk extraction. It is recommended for relieving the symptoms of swelling when extracting milk. It helps to treat inflammation of the breast by removing milk from the affected breast. Its additional task is to relieve irritated or cracked nipples. Through stimulation and massage, the pump pull out flat or inverted nipples, preparing them for milk extraction or feeding.

Before the first and each subsequent use, wash the pump. Use drinking water for washing and rinsing. For disinfecting, use boiling water. After connecting all the elements, check whether the product has been properly connected to a power source. Before touching the breast and personal elements of the breast pump, wash your hands thoroughly with soap and water.

Place the funnel on the breast so that the nipple is centred.

Multifunction button (on/off)

Press the button. The first mode is stimulation. It stimulates the nipple and stimulates milk flow.

You can adjust the frequency and power using the +/- buttons

To turn off the pump, press the button (on/off) and hold it for 3 seconds.

Changing the mode.

Turn on the breast pump (on/off).
The first mode is stimulation. To switch to extraction mode, press the multifunction button (on/off). In this mode, the pump extracts the milk and stimulates its production.

You can adjust the frequency and suction power using the (+/-) button

(+/-) buttons

Increase/decrease the frequency and strength of suction. You can increase the frequency and power of the device using the control button. This means larger amount of milk extracted in less time. After use, dismantle the pump and wash all parts that come into contact with the breast and milk, in order to avoid drying of milk and prevent the growth of bacteria. The pump shuts off automatically after 30 minutes.

Before use, read the user manual carefully.

The power supply must have the correct voltage (100V-240V, DC 6V, 1.0A).

Use only the power supply supplied with Pro Comfort Electric Breast Pump.

For safety reasons, a damaged power cable must be replaced by the manufacturer, in an authorised service centre or by a qualified person.

Do not immerse the electrical unit in water or wash with a wet sponge or cloth.

Do not wet the product.

Do not use while sleeping or when you feel sleepy.

Keep all components out of the reach of children. Prevent children from playing with the device.

Always disconnect the device from the mains when not in use.

The device is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities unless they are under supervision or have been instructed in the use of the device in a safe manner.

Breast pump is a medical device for personal use and should not be used by more than one person.

Sanity® has been present on the world wide market for 20 years as a brand of quality and functional medical products which facilitate recovery and everyday preventive health care for the whole family.

Our products meet the highest safety standards, have passed clinical tests and are certified for compliance with European standards.